The Fires Of Hephaestus (Senri Forge/crafting/open)

[Deleted]

45/50

as he held the small order the metal up in the air he controlled it with his blood. The powers that were in his bloodline what kept him able to manipulate this but not to the fullest extent that he would want to get this is the way he wanted it to look and more than just a marble in the air he was going to need to use the crucible. He move the orb underneath the machine and slowly started to pull and push with all the different respective knows that he created over the dome device.

[Deleted]

46/50

to him the process was long and complicated and involved a lot of different factors different pushing and pulling of several different links of metal that he would need to get done. But what he was going to have to do now was actually for in this into armor that he would be willing to use. This process was difficult but from the outside looking in it would simply look as if he was elegantly crafting perfected suit of armor that defied the laws of physics which in all reality was what he was doing

[Deleted]

47/50

 Slowly the armor started to take it's more basic form you could tell where the chest plate was supposed to go, where the of Domino armor was supposed to say it, they different flanking guards and the different sets of layered armor that made up this big heavy piece of plate. But now it's time to do more of the finer detailing that would set this armor apart from the rest of it's normal armor constituents. Is armor we need to have its own personal flair to it so to speak

[Deleted]

48/50

he started to impress the picture of his house and the rooms of his dojo and his family into the crest of the armor. He started to shape it and create small trenches of impressions adding pictures of great warriors fighting and Wielding lighting. But more importantly what he started the construction and making sure the armor was not just strong but comfortable able to shoulder more of the littler than it normally would be able to. He started to change the electrons in the armor is well

[Deleted]

49/50

The armor looks the way it needed to look but he still had two more steps that he needed to take to finish this armor and get it to its finish position. The first thing he did was he closedhis eyes and start to focus on the density of the metal itself it was dents one of the more dense and strong metals in existence on this planet. But what he was going to do what he was going to make this up to a third stronger he started to compact the electrons and make it molecularly more strong

[Deleted]

50/50

 Finally Yarmer was completed and it's material is exactly the way he wanted it to be there was only one final step that you need to do to make this armor perfected. He leaned in close to the armor still warm from the furnace and started to whisper the ancient words of power. As he did blue markings. Over the armor itself started to shine and flash bright light started to cascade from the armor as you continue to whisper the ancient words of power that would grant this armor it's magical properties

[Kyodai Hyuuga]

Post 8/40

Ryutatsu watched the metal heat up and eventually start melting. Since he was working with raw ore and not the processed stuff he had to work it still. He began skimming the impurities off the top and sifting through the remained. This was dangerous and hot work but it was even more impetrative to have only the purist metal in the mix. Since the Senbon were so small even the slightest flaw could cause irreparable harm. So he was extra careful with even this part of the process.

[Ryutatsu "Sakurai Sword"]

(OOC: Oops wrong account above please remove.)

Post 8/40

Ryutatsu watched the metal heat up and eventually start melting. Since he was working with raw ore and not the processed stuff he had to work it still. He began skimming the impurities off the top and sifting through the remained. This was dangerous and hot work but it was even more impetrative to have only the purist metal in the mix. Since the Senbon were so small even the slightest flaw could cause irreparable harm. So he was extra careful with even this part of the process.

[Skulking Shinzu]

Snow - Craft complete.

[Ryutatsu "Sakurai Sword"]

Post 9/40

Ryutatsu continued to sift through the glowing hot liquid metal. The impurities he siphoned off could be used as raw materials for lesser crafts. Or could be made into his dust that he occasionally used. So he placed it in a bin for later use. But he keep a close eye on the burning hot Stormium and watched for when the impurities would surface. Then using the tools he had available to skim it off the top. Over and over again he would do this process making the Stormium as pure and as high quality it could possibly be.

[Ryutatsu "Sakurai Sword"]

Post 10/40

Once cleansed of all impurities the Stormium was ready for Ryutatsu's use. He made sure he had plenty as he poured the first little bit into the sand mold that he made. He grunted at it hissed and smoked into the mold. He waited for it to cool before knocking the sand off carefully. His face looked disappointed as it was way to thick for a proper Senbon. So he chucked the failure back into the pot to melt. Then went back to the molds to try again.

[Ryutatsu "Sakurai Sword"]

Post 11/40

Again Ryutatsu had to re-craft a mold just for a single senbon. And it was much harder to move grains of sand than it sounded. Grain by grain he moved the molding sand until it was the right general shape. He was literally using tools so tiny to be able to manipulate such a fine thing. He was even using special lensed goggles to see in the detail. Soon though a full picture was forming from his work. Then he moved the mold back to the heated metal that he had spent so much time on.

[KoKoKo]

crafted snowball

[Ryutatsu "Sakurai Sword"]

Post 12/40

Ryutatsu now had mold two to try on the Stormium molten metal. Again he was trying to pour a measured amount to make Senbon. Slowly he tubed a very little amount of the glowing hot metal into the mold for the senbon. Slowly but surely he was making the senbon the Shiki wanted. But it was a delicate process to make the Senbon. So he had to be very careful. He used his blood limit powers to control magnetics to keep the metal steady. On it poured until it was full and he had a piping hot senbon in the process of forming. 

[Ryutatsu "Sakurai Sword"]

Post 13/40

Ryutatsu wiped his head with the back of his sleeve as the heat of working the forge like he has was getting to him. This was tiring and precise work that he was engaged in. So it took him several minutes to get re set up with the new mold next to the metal. And again it was careful pouring of precise measurements. Each drp was carefully controlled and measured as he tried to make the perfect senbon.

[Ryutatsu "Sakurai Sword"]

Post 14/40

A slow pour into the mold and suddenly eureka he had one perfected senbon of a rare material. This was the first of many he had to create. And the unfortunate thing about the process he had so far each pouring of one would destroy the mold made to make it. So he had to remake the mold for each one. There would be no mass production of these senbon, each one would be a unique piece it seemed.

[Deleted]

Torso Armour Piece (Perfected Obd.)
Rank: "S"
Type: Main, Protection, Armour
Effect: Armour created to protect the torso of the wearer.
Special: ---
Drawback: ---
Description: A piece of armour that protects multiple parts of the body. The breastplate, as the name implies, this plate protects the upper chest area. The plackart is an armoured reinforcement covering the lower half of the breastplate. Depending on the design the plackart might cover nearly the entire breastplate. The fauld, armour usually composed of lames, which is attached to the breastplate which serves protection for the abdomen. Then finally the Tasset, solid armour plates or a skirt of lames hung from the fauld to cover the gap between the fauld and the thigh armour. Due to the size of Armour it will always have +50% more Armour Points of Special Material (Steel has 30 Armour Points; Steel Torso Armour Piece has 45 Armour Points). Armour Class: 6. If someone screams "poopy butthole" really loudly people get scared and run away unless they will save at 35.
Limit: These items may be bought inside any Armour Shop.
Cost:

base: 240k
Tech path 3 360k mastercraft Free crafting
Master craft 540k superior Free crafting
Buff and polish 810k prestine Free crafting
Obdernium free 1.215 mil dope Free crafting
+50% for perfected 1.8225 mil
+10% from invoke emotion 2.004.750 price

Crafting math: base 240k + 50% for perfected

360k
improvised tinkering 1/10

36k - 1/4

27k crafting time
860 crafting points

32 posts for completion:

---

Post 1

It had been a long time since Shiki had last been here fighting the passions that normally filled his heart. He was a smith at heart and it had been far to long since he had last sold his wares. He was going to need to really start getting to work crafting some of the stuff he needed to get his money and finances back in order. This was one of the more difficult parts about being a good smith. 

[Deleted]

Post 2


If he was going to need to get this done he figured the first place to start would be where he normally did. Meaning going back over to that familiar piece of crafting that he normally messed with. He was going to start by moving over to the pallet where he was going to need to pull out the material that he was going to specialize this armor quality in. First step was finding the right ingot in the pile. 

[Deleted]

Post 3


This is what made Shiki a cut above the other smiths around these parts. He knew exactly what he was going to need to do in order to make his shit perfect. Everything needed to be done in the most perfected sense of the word. Starting with point one he was going to find the ingot that had all the metalic qualities that he was looking for in simple set of armor. This armor was never going to be used in real combat.  

[Deleted]

Post 4

Rather this armor was going to be made with the idea and the mentality that one day they would simply be held as a collectors piece. He looked over at the rest of the armor that he had made and collected during his time as as craftsman. But he knew that this armor that he was working on right now was going to a bit on the shoddier side of things. He was going to spend most of his time making his armor look good.