The Fires Of Hephaestus (Senri Forge/crafting/open)

[Deleted]

post 24

Shiki realized that this was about as far as a conceptual design that he would want over this period of sketching and planning. He started the process of getting the metal ready once again so that he could once again start the actual metal working process. Shiki reached over and grabbed the tarp canvas that was staring over the pallet of steel ingots that he was going to use for the rest of his time crafting. Shiki smiled as he reached over and grabbed the tarp and pulled.

[Deleted]

Post 25

As he pulled the heavy canvas tarp off from over the ingots there was a lot of dust that came off of the tarp. There on the top of the tarp was a bunch of settled dust and metal powders that had come and fallen off of the grinder since he had last tried to work on some of his last pieces of armor. Shiki looked around and started checking out some of the dust that was still on the canvas before he started touching it. He reached out with his fingers and pinched some of the powder between his fingers.

[Deleted]

post 26

Shiki rolled his fingers back and forth and started feeling more and more of the dust between his fingers. Shiki smiled as he started moving more and more of the dust that was inside of the canvas and started gathering it up inside of a small thumb vial. Shiki collected it up and then all the smaller powder that was on the canvas Shiki eventually shook it off and let the rest of the powder fall to the floor. He pulled the canvas off of the pallet and revealed all of the steel on the wood. 

[Deleted]

Post 27

Shiki started looking around at some of the metal ingots that they had found when they were looking through some of the ingots. He grabbed a steel ingot and started looking for more of the steel for any sort of impurities in the steel that might weaken the alloy and thus make it more unusable for anyone who was trying to craft with it. Steel was something a bit beautiful because if it was imperfect he could make it perfect with just a little bit of love and some time in the forge.

[Deleted]

Post 28  (math after this post 16100 + 28 D100 )


Shiki turned the ingot over and started looking at it trying to get a good understanding of what the properties of the steel were existed. Shiki smiled as he started looking around on the paper. He would need a couple of these things in order to get them completed. Shiki moved over to the metal and started to weigh them in his hands. He closed his eyes and turned on his blood limit as he tried to focus more and more on the steel. As his blood limit cave alive so did his metal sense.

[Deleted]

Post 29

Shiki started gazing into the air around the metal ingots. There was an array of static that filled the air around them. He gazed into them for a short while looking at the electron cloud that covered the metal. There was the hazy faze that was covering the metal all around the ingot. Shiki started examining and looking at all of the electrons that were in the cloud trying to see if he could make heads or tails of the metals properties. Shiki could see the parts that were strong steel. 

[Deleted]

Post 30

Shiki started sifting through the cloud to find out what he could pull through it with just his blood limit on the room temperature steel. Shiki smiled as he started looking at the clouds of the electrons that were moving around him. Shiki started to sift through the static and examine which ingot was both the most stable and solid and which one was both riddled with impurities. Shiki looked at the ingot and tried to pull on some of the metal types that were inside of the metal. 

[Deleted]

Post 31   (Math check 17825 + 31 D100)

Shiki lifted the metal into the air and decided to see what he could to make sure that there was no such issue. He ran the steel back inside of the lightning furnace and waited for the dials to come alive and charge up. Shiki smiled as he started to turn green. He flipped the dial and turned the machine on. As he did he released a powerful explosion of force and lightning that filled the room with the warm immersion of lightning that spread the heat of the fire to a warm toasty explosion of heat.

[Deleted]

32

Shiki watched as the steel began to melt down and become a small ball of pure hot white metal. The ball glowed a bright orange as it continued to get more and more hot as he started to fill the room up with heat. Shiki watched as the ball started to become hotter and hotter and as it did the metals began to seperate. Shiki focused on the electron cloud and was able to focus more on the metal that was impure and different from the steel. As he did he charged them both with the same charge.

[Deleted]

33

As he did the metal got even hotter and they began to push themselves apart and push themselves apart. As they did the metal would seem to sweat the other metal as it was pushed out of the larger orb of metal. Shiki then watched as the two liquids moved apart. Shiki watched as there was another ball that was starting to form out of the impure metals. Shiki smiled as the metal balls were pulled apart. This left a small divot where Shiki dropped the melted junk iron. 

[Deleted]

Post 34  (math check 19550 + 34 D 100)  Target is 20250

Finally now that there was nothing left but the pure steel that was there in the forge he was able to start forming the metal into something that he wanted to make it into. He set the sphere of steel into another small ball that was floating above and over the metal table underneath it. What is more is that over it Shiki would use the metal nodes to create an exact replica of the armor that he was trying to form and create under the nodes. Shiki created the armor and watched the armor form in front of him. 

[Skulking Shinzu]

Rolls

+1,765 Crafting points. New Crafting total is 20,250/20,250.

Craft complete!

[Deleted]

Torso Armour Piece (Steel and Superior)
Rank: "S"
Type: Main, Protection, Armour
Effect: Armour created to protect the torso of the wearer.
Special: ---
Drawback: ---
Description: A piece of armour that protects multiple parts of the body. The breastplate, as the name implies, this plate protects the upper chest area. The plackart is an armoured reinforcement covering the lower half of the breastplate. Depending on the design the plackart might cover nearly the entire breastplate. The fauld, armour usually composed of lames, which is attached to the breastplate which serves protection for the abdomen. Then finally the Tasset, solid armour plates or a skirt of lames hung from the fauld to cover the gap between the fauld and the thigh armour. Due to the size of Armour it will always have +50% more Armour Points of Special Material (Steel has 30 Armour Points; Steel Torso Armour Piece has 45 Armour Points). Armour Class: 6. If you say... "poopy butthole" People must make a will save of 35 or run away in total fear.
Limit: These items may be bought inside any Armour Shop.
Cost: 99000

40000x
1.5
60000x
1.5
90000x
1.1
99000

Material already paid for

---

245 base armor smithing
Artisan Skill Bonus (ArmorSmithing) + 25
Skill focus +30
Eccentric specialist +5
Another Chosen Medium (Chest armor)
+10
Prodigy +20
Tech path III +100
Renown Master of the Craft
+10
Master of Great Renown
+20
Tech path III - Everything is master craft to start
Mastercraft - Everything is one rank lower to make (stacks with tech III)
Attuned tools+ 30
Perfected Smithy +80
---------------------------
Total armorer: 575

---

Total crafting is 20000. 1/3 from journeyman
------------
6,666*.75 From book
------------
5,000 Ryo crafting time.

---

Post 1

Shiki decided that it was time for him to get ready to start the next leg of his of his crafting he was going to make another one of those simple armor sets that he had made a little while earlier. Of course the process was more or less the same. Shiki smiled as he started the next part of the vision. He wanted to make something that he would be able to mass produce as fast as he could crank them out and start forming something easy and great. 

[Deleted]

Post 2

Shiki moved over to the canvas that covered the ingots that he normally worked with and started the process of pulling one apart and starting to look at the ingots that were underneath the canvas. Just like last time as Shiki moved the tarp he saw a lot of metal dust and a shavings that were starting to collect on top of the canvas. Shiki was careful so that as he pulled the tarp down he did not let the dust fall to the floor. Rather that he would just start collecting it.

[Deleted]

Post 3

Shiki started by pulling out a few of the glass thumb vials that he kept inside of the pouch where he kept his alchemical tools and items. Shiki smiled as he looked at the metal dust that was starting to collect on the top of the tarp. He pulled out a small brush that he normally used when he was trying to create some of the appraisal tools that he normally used whenever he was trying to create gems and work on his gem cutting skills. Shiki sued the gem to start dusting some of the powder into the vial. 

[Deleted]

Post 4

Shiki started sweeping some of the metal that was inside of the tarp and on the canvas Shiki started to collect some of the metal powder and would gently dust it in. The brush was originally designed to pick up and recover gem dust and pick up some of the finer more lighter and expensive materials. Shiki smiled as he looked at the fine brush that was able to pick up the steel that had condensed in the air on the tarp. He brushed it in and watched as the dust was easily gathered up. 

[Deleted]

Post 5

Shiki smiled as he picked up the dust and set the thumb vial aside over to the edge where he could keep the rest of his equipment. Shiki looked around and gathered up a lot of the material. As he did he started glancing around at the rest of the ingots that were revealed so he could get to work on the creation of the armor now and finally. Shiki grabbed an ingot and picked it up from the pile that was on the wooden pallet. As he did he grabbed it and moved it to the table.

[Deleted]

Post 6


Shiki picked up the ingot and started looking at the steel inside of the electron cloud and started looking for the rest of his equipment that he could use to start examining the rest of the material. He sifted through the electron cloud and started looking around looking for the rest of the weaknesses and strengths in the metal. There was only so much that Shiki could discern from it currently but he was able to tell some really interesting things about it as a source of metal. 

[Deleted]

Post 7

Shiki started looking over the rest of the equipment and pushed it on the inside of his furnace. As he did the machine started to hum as it came alive. The next thing that Shiki did was he would stand there for a bit until there was a huge build up of static energy that occured at the top and the bottom of the machine. It was like a massive lightning strike that was already starting to form up immensely. Shiki waited for the device to charge up and flipped the switch on the machine. 

[Deleted]

Post 8

As the metal was incinerated and it came alive Shiki smiled as he started to become hot and the temperature began to build up in the metal. Shiki watched as the metal became to so hot he could pick it up and move it around in the air with his blood limit. Shiki smiled as the heat was dispersing from the steel rather quickly. Shiki used his blood limit and pulled and stretched the metal around with little effort. As he did the metal was melted and pulled apart as he created a new chest piece of wonderful armor.